Step 7: Assign I/O Station Slots; Step 8: Assign Logical Libraries; Step 9: Set The Date And Time - IBM System Storage TS3310 Setup And Operator Manual

2. Using the up and down arrows, choose the number of cleaning slots you
3. Touch Next to continue.

Step 7: Assign I/O Station Slots

Read "Configuring I/O Stations" on page 4-4 before beginning this step.
The library has six I/O Station slots assigned as a default. If you purchased a 14U
library and a Capacity Expansion license key (Feature Code 1640), you can assign
additional I/O Station slots. Up to 18 I/O Station slots can be assigned in a 14U
library. If you do not wish to assign additional I/O Station slots, touch No to
continue configuring your library.
To assign additional I/O Station slots:
1. Touch Yes.
2. Using the up and down arrows, choose the number of I/O Station slots you
3. Touch Next to continue.

Step 8: Assign Logical Libraries

Read "Working with Logical Libraries" on page 4-2 before beginning this step.
The library has one logical library configured as a default. The maximum number
of logical libraries that can be configured is equal to the number of drives installed
in the library.
If you do not wish to create additional libraries, touch No to continue configuring
your library.
To create additional logical libraries:
1. Touch Yes to change the number of logical libraries in your library.
2. Using the up and down arrows, choose the number of logical libraries you
3. Touch Next to continue.
4. Modify the library names that appear by touching the text box, and using the
5. Touch Next to continue.
6. Verify that the number of cleaning slots, I/O Station slots, and logical libraries
7. Touch Apply to save the settings and exit the Setup Wizard.

Step 9: Set the Date and Time

1. Enter the current date and time by touching each square and entering the
2. Touch Apply to save the date and time settings and to continue.
would like to assign in your library.
would like to assign in your library.
wish to set up in your library.
alphanumeric keyboards to type in a name.
created is correct.
current value.
Note: The library clock is on a 24-hour cycle. For example, 4:00 pm would be
entered as 16 (HH) and 00 (MM). Clock management may require your
to reset the time.
Chapter 6. Configuring the Library
6-5