Step 10: Import Cleaning Cartridge(S); Step 11: Populate Your Library With Data Cartridges; Step 12: Register For My Support - IBM System Storage TS3310 Setup And Operator Manual

3. Touch Close to continue.

Step 10: Import Cleaning Cartridge(s)

Read "Understanding Cartridge Assignment in the Library" on page 4-1 before
beginning this step.
1. Place a cleaning cartridge in the I/O Station.
2. Touch System to assign the cleaning cartridge to the entire library system and
3. Select Operations → Importing Cleaning Media.
4. Select the designed destination slot for the cleaning cartridge.
5. Touch OK.
6. Repeat this procedure for each cleaning cartridge.

Step 11: Populate your Library with Data Cartridges

Read "Understanding Cartridge Assignment in the Library" on page 4-1 before
beginning this step.
To methods are available for populating your library with data cartridges:
v Bulk loading
v Importing via the I/O Station
Bulk load cartridges into your library if the following criteria is met:
v if your library is licensed for full capacity
v if you are loading blank cartridges
v if cleaning slots have been assigned and hold cleaning cartridges
Storage slots are not assigned consecutively in a logical library. To ensure that your
cartridges get placed in the correct logical library, import your data cartridges via
the I/O Station following the procedure below.
1. Determine the number of available storage slots in each logical library by
2. Using the right and left arrows near the top of the screen, scroll between logical
3. Load the I/O Station with data cartridges.
4. Choose the logical library to which these cartridges are to be assigned.
5. Select Operations → Import Media.
6. Repeat this procedure until all data cartridges have been imported into the

Step 12: Register for My Support

My Support registration provides email notification from IBM when new firmware
levels have been updated and are available for download and installation as well
as other information about your library.
To register for My Support:
6-6
TS3310 Tape Library Setup and Operator Guide
not to a specific logical library.
returning to the Capacity View home screen.
libraries and make note of the number of storage slots assigned to each logical
library.
library.