SSANGYONG Musso Sports N100 2003 Manual page 1274

5C-12 CLUTCH
Inspection Procedure
1. Clutch Cover
Check the diaphragm spring tip for wear and height
l
unevenness.
Unevenness Limit
Check the pressure plate surface for wear, crack and
l
discoloration.
Check the strap plate rivet for looseness and replace
l
the clutch cover if loosened.
2. Clutch Disc
Check the facing for rivet looseness, excessive runout,
l
sticks, oil and grease.
Measure the rivet head depth.
l
If out limit, replace the disc.
Wear Limit
3. Clutch Release Bearing
The release bearing is permanently lubricated and
l
requires no cleaning.
Check the bearing for sticks, damage, abnormal noise,
l
turning drag and wear.
4. Release Fork
If there is abnormal wear in contact point with bearing,
l
replace the release fork.
0.8 mm
0.3 mm