Component Test - Autel AUTOLINK AL529 Manual

NOTE
If the On-Board Monitor Test failed, this monitor item will be red color. Just
by the text color you may easily find out which system is at fault.
Figure 4-36 Sample On-board Mon. Test Screen 4
8) Press ESC button to return to the previous menus.

Component Test

The Component Test function allows initiating a leak test for the vehicle's
EVAP system. The scan tool itself does not perform the leak test, but
commands the vehicle's on-board computer to start the test. Different
vehicle manufacturers might have different criteria and methods for stopping
the test once it has been started. Before starting the Component Test, refer
to the vehicle service manual for instructions to stop the test.
1) Use the UP/DOWN scroll button to select Component Test from
Diagnostic Menu and press the OK button.
2) Wait for the scan tool to display the Component Test menu.
Figure 4-37 Sample Component Test Screen 1
3) If the test has been initiated by the vehicle, a confirmation message will
be displayed on the screen.
48