Autel AUTOLINK AL529 Manual page 16

1) From System Setup screen, use the UP/DOWN scroll button to select
Status Beep Set and press the OK button.
2) From Status Beep Set menu, use the UP/DOWN scroll button to select
Beep ON or Beep OFF to turn on/off the beep.
Figure 2-9 Sample Status Beep Set Screen
3) Press the OK button to save your selection and return to previous menu.
Tool Self-test
The Tool Self-test function checks if the display, LED lamps and keyboard
are working properly.
Display test
The Display Test function checks if the LCD display is working normally.
1) From System Setup screen, use the UP/DOWN scroll button to select
Tool Self-test, and press the OK button.
2) Select Display Test from Tool Self-test menu and press the OK button
to start test.
Figure 2-10 Sample Tool Self-test Screen
12