Autel AUTOLINK AL529 Manual page 13

Figure 2-6 Sample Configure Monitors Screen
In this menu, you could configure the monitors required to test spark ignition
and compression ignition, the number of monitors to pass diagnosis, and
restore the default settings.
Spark IGN Required Monitors
From Configure Monitors screen, use the UP/DOWN scroll button to select
Spark IGN Required Monitors, and press the OK button.
The monitors for spark ignition engines list as below.
√
√
√
√
√
Compression IGN Required Monitors
From Configure Monitors screen, use the UP/DOWN scroll button to select
Compression IGN Required Monitors, and press the OK button.
The monitors for compression ignition engines list as below.
Table 2-2
Spark IGN Required Monitors
√
MIS
√
FUEL
√
CCM
√
CAT
√
HCAT
9
EVAP
AIR
O2S
HTR
EGR