Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Align the camera module with the camera cable.
2. Connect the camera cable to the camera module.
3. Using the alignment post adhere the camera module to the display back-cover and antenna assembly.
Post-requisites
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the
base
cover.
80
Replacing the camera
Replacing the camera
computer. After working inside your computer, follow the instructions in
45
After
Advertisement
Table of Contents
