Next steps
1. Install the
display
bezel.
2. Install the
hinge
caps.
3. Install the
display
assembly.
4. Install the
WLAN
card.
5. Install the
base
cover.
6. Exit
service
mode.
7. Install the
SD
card.
8. Follow the procedure in
Camera
Removing the camera
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Enter
service
mode.
4. Remove the
base
cover.
5. Remove the
WLAN
card.
6. Remove the
display
assembly.
7. Remove the
hinge
caps.
8. Remove the
display
bezel.
9. Remove the
display
panel.
About this task
Steps
1. Disconnect the camera cable from the camera module.
2. Using a plastic scribe, gently pry the camera off the display back-cover and antenna assembly.
66
Removing and installing components
after working inside your
before working inside your
computer.
computer.