Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Place the display panel on a flat surface.
2
Replace the camera.
3
Turn over the display-panel assembly.
4
Route the display cable through the routing guides inside the hinge covers.
5
Align the display-panel assembly with the display back-cover and antenna
assembly and gently snap the display-panel assembly into place.
Post-requisites
1
Replace the
display
2
Replace the battery.
3
Replace the
base
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
www.dell.com/
Before
89