3. Slide the Nano-SIM card tray out of the slot on the system.
4. Align and place the Nano-SIM card in the dedicated slot on the Nano-SIM card tray.
5. Slide the Nano-SIM card tray back into the slot on the system.
Next steps
Follow the procedure in
after working inside your
computer.
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in
Before working inside your
computer.
2. Remove the
nanoSIM-card
tray.
About this task
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
Figure 19. Base cover removal
42
Removing and installing Customer Replaceable Units (CRUs)