Table of Contents
Advertisement
QUICK REFERENCE GUIDE
Use this section for a quick reference for an overview of the operational features
of the D3208 Multizone Controller after initial setup and programming has been
completed. For more detailed features, please refer to the Programming/
Operation section of the manual.
CALL SCENE:
Used to choose which of the 32 programmed scenes are to be
called or activated.
• Press a SCENE button (refer to Figure 4) to call or activate a programmed
scene.
ADJUST ZONE LIGHT LEVEL:
percentage of light level for selected zones.
• Press the Zone Dim/Bright buttons to increase or decrease the percentage
of light level for individual zones (refer to Figure 4).
• Press the Dim Scene buttons to increase or decrease the percentage of
light level for all zones (refer to Figure 4).
CHANGE SCENE BANK:
scenes can be accessed and which SCENE buttons will control those scenes
(01-08, 09-16...25-32).
• Press the Function button (refer to Figure 4) to toggle though the Scene
Banks (01-08, 09-16...25-32) and then press a SCENE button to activate
that bank.
PROGRAMMING SCENE:
rates to desired scenes.
• Press and hold down a SCENE button for approximately 8 seconds to
access program mode.
• Press the Up or Down and Left or Right buttons to
Edit Scene Name (i.e., Hallway Lights). Press the
Select/Next button to save entry and proceed.
• Press the Up or Down button to set the desired fade
time (default, 0:00 seconds to 2h00m) . Press the
Select/Next button to save entry and proceed.
• Press the Dim/Bright buttons to turn lighting loads ON, OFF, or adjust
percentage of lighting level (refer to Figure 4).
• Repeat steps for additional scenes.
DI-000-D3208-00A-2/13/02
QUICK REFERENCE GUIDE
Used to increase or decrease the
Use to choose which of the 32 programmed
Use to program, name and set fade-transition
7
Edit Scene Name:
SCENE 01
SCENE 01
Set Fade: <DEF>
3/6/02, 11:04 AM
5
Advertisement
Table of Contents
