µ-Dimension D3208 User Manual page 32

PROGRAMMING AND OPERATION
8. Press the Up or Down buttons to select the Timer
Status (DELETE, ENABLE, DISABLE). Press the
Select/Next button to save entry and proceed.
9. Repeat procedure for setting up additional Timers.
10. Press the Select/Next button to return the TIMER WIZARD screen.
Location Setup – The Multizone Controller will calculate the dawn/dusk times
based on the Latitude/Longitude selected.
11. Press the Select/Next button to access the TIMER
WIZARD.
12. Press the Up or Down buttons to select the
Location Setup screen.
13. Press the Select/Next button to access the
Location Setup menu.
14. Press the Up or Down buttons to select the
desired Time Zone (Samoa, Atlantic, Eastern,
Central, Mountain, Pacific, Alaska, or Hawaii
Standard). Press the Select/Next button to save
entry and proceed.
15. Press the Up or Down buttons to select the
appropriate Longitude for your location (refer to
the Appendix–to find appropriate settings for
your location–and the Longitude/Latitude Chart).
16. Press the Up or Down buttons to select the
appropriate Latitude for your location refer to the
Appendix–to find appropriate settings for your
location–and the Longitude/Latitude Chart).
17. Location Setup is now Finished.
Holiday
– Used to setup a timed Holiday schedule.
18. Press the Select/Next button to access the TIMER
WIZARD.
19. Press the Up or Down buttons to select the
Holiday screen.
20. Press the Select/Next button to access the
Holiday menu.
NOTES:
• If no Holidays have been previously programmed or you want to add a
new Holiday, proceed to Step 21A.
• If you want to modify an existing Holiday, proceed to Step 21B.
30
DI-000-D3208-00A-2/13/02 32
NEW TIMER
STATUS: <ENABLE>
V
Use , v or SEL
<TIMER WIZARD>
V
Use , v or SEL
>Location Setup
Select Time Zone
<EASTERN Stndrd>
Enter Longitude
West> 000 Deg
Enter Latitude
North> 000 Deg
Location Setup
Finished!
V
Use , v or SEL
<TIMER WIZARD>
V
Use , v or SEL
>Holiday
3/6/02, 11:05 AM