µ-Dimension D3208 User Manual page 26

PROGRAMMING AND OPERATION
2. Press the Up or Down button to select the Program
Scene screen.
3. Press the Select/Next button to access the Program
Scene screen.
4. Press the Up or Down button to select the desired
Scene (1-32). Press the Select/Next button to save
entry and proceed.
5. Press the Up or Down and Left or Right buttons to
Edit Scene Name (i.e., Hallway Lights). Press the
Select/Next button to save entry and proceed.
6. Press the Up or Down button to set the desired
fade time (default, 0:00 seconds to 2h00m). Press
the Select/Next button to save entry and proceed.
7. Adjust the levels for each zone and press the Select/Next button twice
to store the scene.
8. Repeat procedure to program additional scenes.
9. SCENE WIZARD programming is now Finished.
Set Scene Bank –
B
SCENE buttons will control what scenes (01-08, 09-16...25-32). Proceed as
follows:
1. Press the Wizards button and then the Up or Down
button (if necessary) to select the SCENE WIZARD.
Press the Select/Next button to access the SCENE
WIZARD.
2. Press the Up or Down button to select the Set
Scene Bank screen.
3. Press the Select/Next button to access the Set
Scene Bank screen.
4. Press the Up or Down button to select the desired
Scene Bank (01-08...25-32). Press the Select/Next
button to save entry and proceed.
5. Press the Select/Next button once to return to the SCENE WIZARD
screen or press the Select/Next button and then the Wizards button to
return to the Main Screen.
6. Repeat procedure to set additional banks.
24
DI-000-D3208-00A-2/13/02
Used to setup a total of up to 32 scenes and which
26
V
Use , v or SEL
> Program Scene
Select scene: 01
SCENE 01
Edit Scene Name:
SCENE 01
SCENE 01
Set Fade: <DEF>
V
Use , v or SEL
<SCENE WIZARD>
V
Use , v or SEL
>Set Scene Bank
SCENE BANK
<01-08>
3/6/02, 11:05 AM