µ-Dimension D3208 User Manual page 33

21A.To Setup a New Holiday (if there are existing Holidays
programmed, press the Up button to select the Add New Holiday
screen):
Press the Select/Next button to access the Add
New Holiday screen. Proceed to Step 22.
21B.To Modify an existing Holiday: Press the Select/
Next button to access the programmed Holiday
screen. Press the Down button to scroll through
the existing Holidays. Press the Select/Next button
to select the desired Holiday to modify. Proceed as follows:
22. Press the Up or Down and Left or Right buttons
to Edit Holiday Name (i.e., New Years Day). Press
the Select/Next button to save entry and proceed.
23. Press the Up or Down and Left or Right buttons
to Edit Holiday Date (i.e., 01/02, this is month and
day). Press the Select/Next button to save entry
and proceed.
24. Press the Up or Down buttons to select the
Holiday Status (DELETE, ENABLE, DISABLE).
Press the Select/Next button to save entry and
proceed.
25. Repeat procedure for setting up additional holidays.
26. The TIMER WIZARD is now finished.
27. Press the Wizards button to return the Main Screen.
CONFIG WIZARD (for partitioning only) –
A
programming allows for the setting and editing of up to 256 configurations. It
allows the user to change the name and configuration already setup in the
Setup/Panels menu (i.e., add partition, change to group 2). Proceed as
follows:
NOTE: If configurations have not been already setup, run through the Setup/
Panel Wizard.
Set Config
– Used to change to a different configuration when room
partitions are changed.
1. Press the Wizards button and then the Up or Down
button to select the Config Wizard. Press the Select/
Next button to access the CONFIG WIZARD.
2. Press the Select/Next button to access the Set
Config screen.
DI-000-D3208-00A-2/13/02
PROGRAMMING AND OPERATION
33
Add New Holiday
Press SEL to Add
New Holiday
T:01 D:3/28
Edit Name:
New Holiday
NEW HOLIDAY
Edit Date: 3/28
NEW HOLIDAY
STATUS: <ENABLE>
The CONFIG WIZARD
V
Use , v or SEL
<CONFIG WIZARD>
V
Use , v or SEL
>Set Config
3/6/02, 11:05 AM
31