µ-Dimension D3208 User Manual page 11

9. Check for power to the Multizone Controller by verifying that the GREEN
LCD on the front of the unit is displaying the Dimensions D3200 splash
screen.
10. If necessary, increase or decrease the contrast of the display first, remove
the overlay by gently lifting and releasing the tabs. Then, use a small Philips
style screwdriver to slightly turn the adjustment until preferred contrast is
achieved. To replace overlay, carefully insert lower tabs into front slots of
frame and then bow overlay so that top tab slips into top slot (refer to
Figure 1).
10. Reinstall the Front Door Frame assembly by aligning with unit. Carefully
press the frame onto unit until it snaps into position. Press all edges to
ensure that it is fully seated.
11. INSTALLATION IS COMPLETE.
DI-000-D3208-00A-2/13/02
INSTALLATION INSTRUCTIONS
11 3/6/02, 11:04 AM
9