Quick Reference Guide - µ-Dimension D3206 User Manual

QUICK REFERENCE GUIDE

Use this section for a quick reference for an overview of the operational features
of the D3206 Multizone Controller. For customizing features, please refer to the
Programming/Operation section of the manual.
CALL SCENE:
Used to choose which of the 32 programmed scenes are to be
called or activated.
• Press a SCENE button (refer to Figure 4) to call or activate a programmed
scene.
ADJUST ZONE LIGHT LEVEL:
percentage of light level for selected zones.
• Press the Zone Dim/Bright buttons to increase or decrease the percentage
of light level for individual zones (refer to Figure 4).
• Press the Dim Scene buttons to increase or decrease the percentage of
light level for all zones (refer to Figure 4).
CHANGE SCENE BANK:
scenes can be accessed and which SCENE buttons will control those scenes
(01-08, 09-16...25-32).
• Press the Function button (refer to Figure 4) to toggle though the Scene
Banks (01-08, 09-16...25-32) and then press a SCENE button to activate
that bank.
PROGRAMMING SCENE:
• Press and hold down a SCENE button of the scene to be progammed for
approximately 8 seconds until scene button blinks to access program
mode.
• Press the Dim/Bright buttons to turn lighting loads ON, OFF, or adjust
percentage of lighting level to desired level (refer to Figure 4).
• Press SCENE button again to set scene.
• Repeat steps for additional scenes.
NOTE: For Name and Fade Rate programming, refer to program and operation
of the Scene Wizard.
DI-000-D3206-00B
QUICK REFERENCE GUIDE
Used to increase or decrease the
Use to choose which of the 32 programmed
Used to program to desired scenes.
7 11/6/03, 10:59 AM
5