µ-Dimension D3208 User Manual page 27

Set Scene Group –
A
or Scene Buttons 1-8) are made for the group chosen here. Proceed as
follows:
1. Press the Wizards button and then the Up or Down
button (if necessary) to select the SCENE WIZARD.
Press the Select/Next button to access the SCENE
WIZARD.
2. Press the Up or Down button to select the Set
Scene Group screen.
3. Press the Select/Next button to access the Set
Scene Group screen.
4. Press the Up or Down button to select the desired
Scene Group (01-64). Press the Select/Next button
to save entry and proceed.
5. Press the Select/Next button once to return to the SCENE WIZARD
screen or press the Select/Next button and then the Wizards button to
return to the Main Screen.
6. Repeat procedure to change scene group.
Scene Lock –
Used to lock out or enable Scene and Dim/Bright buttons:
A
1. Press the Wizards button and then the Up or Down
button (if necessary) to select the SCENE WIZARD.
Press the Select/Next button to access the SCENE
WIZARD.
2. Press the Up or Down button to select the Scene
Lock screen.
3. Press the Select/Next button to access the Scene Lock screen.
4. Press the Up or Down button to set the selected
scene to On or OFF. Press the Select/Next button to
save entry and proceed.
5. Press the Select/Next button once to return to the SCENE WIZARD
screen or press the Select/Next button and then the Wizards button to
return to the Main Screen.
6. Repeat procedure to unlock scene.
Exclude Zones –
A
in a programmed scene. Proceed as follows:
1. Press the Wizards button and then the Up or Down
button (if necessary) to select the SCENE WIZARD.
Press the Select/Next button to access the SCENE
WIZARD.
DI-000-D3208-00A-2/13/02
PROGRAMMING AND OPERATION
Scene calls made from the Multizone Controller (Menu
Used to remove a particular zone or zones from executing
27
V
Use , v or SEL
<SCENE WIZARD>
V
Use , v or SEL
>Set Scene Group
SELECT GROUP
<01>
V
Use , v or SEL
<SCENE WIZARD>
V
Use , v or SEL
>Scene Lock
Scene Group: 01
Scene Lock <ON>
V
Use , v or SEL
<SCENE WIZARD>
3/6/02, 11:05 AM
25