Table of Contents
Advertisement
PROGRAMMING AND OPERATION
Removing IR learned commands –
9. Press the Wizards button and then the Up or Down
button to select the IR WIZARD. Press the Select/
Next button to access the IR WIZARD.
10. Press the Up or Down button to select the Delete
IR screen. This setting is used to remove the
programming commands for sets scenes.
11. Press the Select/Next button to access the Delete
IR screen.
12. Press the Up or Down button to select the desired Action to Remove
(SCENE 01-32, DIM, BRIGHT, OFF, MAX, REMOVE ALL). Press the
Select/Next button to save entry and proceed.
13. Press the Select/Next button to remove the
selected Action. Press the Select/Next button to
save entry and proceed.
14. Repeat procedure for removal of additional commands.
15. IR command removal is now finished.
16. Press the Wizards button to return the Main Screen.
A
TIMER WIZARD
events. Timers can trigger either a SCENE, MAX or an OFF command.
Completion of the Wizard will enable preferred events to be activated.
Proceed as follows:
Timers –
Used to program Timer information, including schedules,
astronomical settings, and scenes triggered. Proceed as follows:
1. Press the Wizards button and then the Up or Down
button to select the TIMER WIZARD. Press the
Select/Next button to access the TIMER WIZARD.
2. Press the Select/Next button to access the Timers
menu. This setting is used to setup the programming
commands for selected Timers.
NOTES:
• If no Timers have been previously programmed or if you want to add
a new Timer, proceed to Step 3A.
• If you want to modify an existing Timer, proceed to Step 3B.
3A.To Setup a New Timer (if there are existing Timers programmed,
press the Up button to select the Add New Timer screen):
Press the Select/Next button to access the Add
New Timer screen. Proceed to Step 4.
28
DI-000-D3208-00A-2/13/02
–
The Timer Wizard allows for the programming of up to 64
30
V
Use , v or SEL
<IR WIZARD>
V
Use , v or SEL
> Delete IR
Select to Remove
<REMOVE_ALL>
Code Removed
V
Use , v or SEL
<TIMER WIZARD>
V
Use , v or SEL
>Timers
Add New Timer
Press SEL to Add
3/6/02, 11:05 AM
Advertisement
Table of Contents
