µ-Dimension D3208 User Manual page 28

PROGRAMMING AND OPERATION
2. Press the Up or Down button to select the Exclude
Zones screen.
3. Press the Select/Next button to access the Exclude
Zones screen.
4. Press the Up or Down button to select the desired
scene to modify (01-32). Press the Select/Next button to save entry and
proceed.
5. Press the Up or Down button to set the desired
zone(s) to Exclude (1-8). Press the Select/Next
button to save entry and proceed.
6. Press the Select/Next button to Exclude zone.
7. Repeat Step 5 and 6 to exclude additional zones or
press the Cancel/Previous button to proceed and
return to the Main Screen.
ZONE WIZARD –
minimal levels and the option to lock and unlock zones. Proceed as follows:
Adjust Minimum –
B
Loads. Proceed as follows:
1. Press the Wizards button and then the Up or Down
button to select the Zone Wizard. Press the Select/
Next button to access the Zone Wizard.
2. Press the Select/Next button to access the Adjust
Min Level screen.
3. For Dimmers Only, press the Up or Down buttons
or the Dim/Bright buttons to set the individual zone
minimum light levels.
NOTE: DO NOT use the Dim Scene buttons to make this adjustment.
4. Press the Select/Next button to save entry and
proceed.
5. Repeat procedure for programming of additional zones.
6. Press the Select/Next button to return the ZONE WIZARD screen.
Lock/Unlock –
Used to program the locking or unlocking of individual
A
zones. Locking will render the Dim/Bright buttons nonfunctional. Proceed as
follows:
7. Press the Select/Next button to access the ZONE
WIZARD.
26
DI-000-D3208-00A-2/13/02
The ZONE WIZARD programming provides settings for
Used to program the minimum lighting levels for specific
28
V
Use , v or SEL
> Exclude Zones
Select scene: 01
SCENE 1
PANEL:01 ZONE:1
ZONE# 01-1
Press SEL
to Exclude Zone
V
Use , v or SEL
<ZONE WIZARD>
V
Use , v or SEL
>Adjust Minimum
Adjust Zones'
Minimum Levels
Minimum Adjusted
Press SEL
V
Use , v or SEL
<ZONE WIZARD>
3/6/02, 11:05 AM