Installation; Ports Required For Communication; Installation Steps - LINET LINIS SafetyPort Instructions For Use Manual

7

Installation

The LINIS SafetyPort system is installed by LINET. The standard installation is performed using remote access, that is
provided by the customer (VPN). VPN provision is a required and installation cannot be completed unless it is provided.
VPN access shall be handled by a separate NDA (provided by a customer).

7.1 Ports required for communication

→
 bed LINIS SafetyPort server: 10180, LINIS SafetyPort server
←→
 user workstation
 LINIS SafetyPort server

7.2 Installation steps

Installation prerequisites:
Functional internet infrastructure

Functional hospital information system

Opened required ports

Stable display monitor to open Administration interface and/or SafetyPort Dashboard

Ready to install LINIS server

Remote access to the server

Installation of beds

Installation steps:
LINIS server installation

Communication of Multicare beds or Multicare LE beds or Eleganza 5 beds or Eleganza 4 or Eleganza 3XC

or Eleganza 3 (US version) beds with LINIS server
Localisation system installation (LINIS SafetyPort bed + Tag)

SafetyPort installation

Test of the functional connection of bed, server and 3rd party software (HIS)

Technical training

20/52
LINIS SafetyPort server: 8888, 3600, 3306
←→
third party server (e.g: HIS): based on third party server requirements (1337 typically)
→
bed: 10180 or any
D9U001SW2-0110_03