Administration Interface; Software Version; Login - LINET LINIS SafetyPort Instructions For Use Manual

11.4 Administration Interface

WARNING!
LINIS SafetyPort system does not sent any data if not enabled in the Administration interface and if the beds
are not connected to the mains power.
Administration interface is used to set up a LINIS SafetyPort system during the installation or if any changes to the cur-
rent set up need to be done afterward.
The main features include:
setting up a hospital, creating WORKSPACES, WARDS, ROOMS based on the actual set up of the LINIS Safe-

tyPort system in the facility
setting up parking spaces in the ROOMS and connecting compatible beds with the system

enabling the transfer of data and setting up the data types to be transferred to HIS, specifi cally choosing which

data (out of the 39 diff erent types) should be sent and how often
data history to view the history of the data sent

the view if the LINET beds connected to the LINIS SafetyPort system are offl ine or online and if the beds physi-

cally are at the assigned parking place or not

11.4.1 Software version

Software version number is displayed on the top bar in the Administration interface.
Fig. Software version number in the Administration interface

11.4.2 LOGIN

In order to LOGIN into ADMINISTRATION interface, admin login account is required.
D9U001SW2-0110_03 23/52