LINET LINIS SafetyPort Instructions For Use Manual page 35

HL7 LOG
This section may or may not appear in the menu depending on the settings of your environment. It serves primarily for
testing and troubleshooting purposes. It contains the history and status of messages sent via HL7 by the SafetyPort Data
Transfer product. This section may be remotely turned on and off by a member of LINET staff .
HL7 messages can be fi ltered by Parameter and Bed in the upper right corner. The list of messages can be arranged by
clicking on the arrows (up or down) next to following:
BED UNIT ID: ID of integration module

MESSAGE ID: ID of a specifi c message

PARAMETER: name of the value

VALUE: value out of value range

TIMESTAMP: when the value change occurred

ACK: acknowledgment - information stating whether the reception of the message was confi rmed or

unconfi rmed by the endpoint
Fig. HL7 Log
D9U001SW2-0110_03 35/52