Table of Contents
Advertisement
Network Setup Guide for KD-IP822, KD-IP922, KD-IP1022, KD-IP1080
1. Connect your PC directly to the network switch. Your PC will need to be set to a static IP address that is
within the subnet of the default IP address of the switch. This series of switches typically use
192.168.2.1 as their default IP address
2. Log into the switch via web browser using the IP address. There will be a prompt to enter credentials. By
default, both username and password are set to "admin"
Back to top
Signamax SC30020
99 |
P a g e
Advertisement
Table of Contents
Need help?
Do you have a question about the KD-IP1022ENC and is the answer not in the manual?