Table of Contents
Advertisement
Step 13 After you click Submit :
•
The switch is configured and exits
Express Setup mode.
•
The browser displays a warning message
and tries to connect with the earlier
switch IP address. Typically, connectivity
between the PC or laptop and the switch
is lost because the configured switch IP
address is in a different subnet from the
IP address on the PC or laptop.
Now, change IP address of your PC or laptop to
static IP address in same subnet of the Switch.
Step 14 To configuring Multicast IGMP Snooping and Jumbo Frame setting at the switch for KD-IP922 devices,
you have to connect to the Switch via Telnet.
Note. To access Telnet, you can use PuTTY or Tera Term software.
We recommend to use Tera Term software and you can download it as below link.
https://osdn.net/projects/ttssh2/downloads/68252/teraterm-4.96.exe/
Run Tera Term software, and press Alt + N keys to open new connection.
14-1. Select "TCP/IP" on Tera Term:New Connection Window.
14-2. Type the IP address of the Switch at the field of Host: Ex) 192.168.1.251
14-3. Type 23 at the field of TCP Port# and select "Telnet".
14-4. Then click OK button.
Back to top
29 |
P a g e
Advertisement
Table of Contents
