Key Digital KD-IP1022ENC Manual page 112

8. Set the static IP address of the network switch.
Go to L3 FEATURES -> Interface. Ensure IPv4 Routing is enabled. If not, apply the IPv4 routing.
Click "Edit IPv4" to set the desired IP address of the network switch.
9. Select "Static" and enter the desired IP address and subnet mask. Click Apply.
IP address can be changed by the administrator depending on the network configuration.
We recommend using an address that is within the subnet of the AVoIP system for ease of maintenance
After applying, you will need to log in again using new IP address. (Ensure the PC and switch are the same
network before login).
112 | P a g e
Back to top