Single gang hdmi usb-c over 164ft / 50m cat6/6a auto switching wall plate switcher transmitter with receiver kit. 4k uhd, 18g, power over cat (12 pages)
, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high-end video and control are important. Key Digital ® is at the forefront of the video industry for Home Theater...
Step 4: Connect your HDMI displays to the output port of KD-Pro2x1/KD-Pro4x1 unit KD-Pro4x1 The KD-Pro2x1/KD-Pro4x1 unit may be controlled via the push button on the front of the unit. HDMI Step 5: BEFORE connecting power supply to power outlet, screw-in the power supply Select the desired input by pressing the “Input Select”...
There are two positions for this switch. Rear Panel Connections Auto Sensing ON All connections to the KD-Pro2x1/KD-Pro4x1 are found on the rear panel of the units. Refer Unit is forced to auto sense for a present HDMI signal and will switch to the »...
Page 5
Audio Outputs: Audio Input Audio L/R Digital Audio Output Located on the ride side of the unit » Signal Format Output (Coax and Optical) Audio from the output HDMI signal is de-embedded into an analog or digital signal » 2ch PCM Pass-Through Pass-Though Ethernet Jack, Serial IR, RS-232, and Power Block:...
Settings and Adjustments The KD-Pro2x1/KD-Pro4x1 unit provides a 16 position EDID rotary located on the left side of the back panel. Rotate the rotary to the desired position to change the EDID setting. The KD-Pro2x1/KD-Pro4x1 unit may be configured using the provided IR Remote. Such Notes: settings and adjustments include unit address, Hot Plug Detection, and EDID settings.
-- System Address Setup Command: xx = [00-99], 00 = Single -- SPC Axx : Set System Address to xx The KD-Pro2x1/KD-Pro4x1 allows control over serial interface for bi-directional communication. Use Pins 4, 5, 6 for RS-232 communication. -- System Control Setup Commands:...
Damage to the power supply or power plug » Exposure to rain or moisture » Power Supply Use: You MUST use the Power Supply provided with your unit or you VOID the Key Digital ® Warranty and risk damage to your unit and associated equipment.
Customer Support For customer support questions please contact us at: Phone: 914-667-9700 › E-mail: customersupport@keydigital.com › Technical Support For technical questions about using Key Digital products, please contact us at: ® Phone: 914-667-9700 › E-mail: tech@keydigital.com › Repairs and Warranty Service...