Network Setup Guide for KD-IP822, KD-IP922, KD-IP1022, KD-IP1080
Login to the switch with the following steps:
1. Plug an Ethernet cable into any of the ports of the switch
2. Plug the other end into the Ethernet port of your computer
3. Power on the Switch
4. Check to see that the IP address of the computer is within this network, 192.168.0.xxx ("xxx" ranges 1~254).
For example, 192.168.0.100
5. Open the Web browser, and enter 192.168.0.239 (default IP address of Netgear GS). The login window
appears as below:
Back to top
Netgear GS Series
79 |
P a g e