9. (optional). If using stacked Switches, verify that POE+ is enabled. This setting can be accessed from
Configuration→ Quick Setup → POE→ Configuration
10. To save all Running Configurations to Startup-Configuration, Find Administration → Configuration → Save
startup-config in the menu on left side of the window. Then click "Save Configuration" button in Save
Running Configuration to startup-config window.
11. To reboot the switch, Find Administration → Reboot in the menu on left side of the window. Then click
"Yes" button in Reboot Device window. The switch will be rebooted automatically.
Back to top
76 |
P a g e