Key Digital KD-IP1022ENC Manual page 28

Note. Please do not click "Submit" button in this step.
Step 12 Select the Advanced Settings tab on the Express Setup window
•
In the Telnet Access field, click Enable to use Telnet to manage the switch by using the
command-line interface (CLI). If you enable Telnet access, you must enter a Telnet password.
•
In the Telnet Password field, enter a password. The Telnet password can be from 1 to 25
alphanumeric characters, is case sensitive, allows embedded spaces, but does not allow spaces
at the beginning or end. In the Confirm Telnet Password field, reenter the Telnet password.
And click Submit to save your changes and to complete the initial setup.
Back to top
28 | P a g e