Table of Contents
Advertisement
Linksys LGSxxxMPC setup guide – Updated GUI
1. Ensure that your PC is set to a static IP address that is within the subnet of the network switch
(192.168.1.xyz)
2. Connect to the network switch via its default IP address – 192.168.1.251. The default login credentials
are:
Username: "admin"
Password: "admin"
After connecting, change the password to gain access to the switch.
3. Set the IP address of the switch to the desired address. This setting is accessed via System -> IP settings
-> IPv4 Management.
3a. If stacking multiple network switches, each will require a unique IP address.
Back to top
*Steps related to stacking multiple switches are in red*
(Click Here for old
GUI)
47 |
P a g e
Advertisement
Table of Contents
Need help?
Do you have a question about the KD-IP1022ENC and is the answer not in the manual?