Key Digital KD-IP1022ENC Manual page 80

6.
7. Enter the password (default password is "password"). And then click 'OK" to login to the switch
configuration window
8. To enable Jumbo Frame of the switch, go to Switching -> Ports -> Port Configuration. (IP922 requires Jumbo
Frame(8K) for video/audio transmission via 1G-BaseT). Select the empty checkbox that is above the
checkbox beside g1 Port in the table to select all the ports. All selected ports highlight to yellow color. Then
enter "9216" in Maximum Frame Size field as shown below and press Apply button
Back to top
80 | P a g e