Table of Contents
Advertisement
8. Navigate to Settings -> System. Under IP Address Settings elect Static. Change an IP address to
192.168.1.251, Subnet Mask to 255.255.255.0, Default Gateway to 192.168.1.1 (in this case), and at the
bottom click Apply. If you are setting up multiple network switches it is recommended to set first one to
192.168.1.251, second to 192.168.1.252, and so on, and each switch must be set individually same way as
described below.
9. Page will refresh. Configure your PC's IP address to the same range as the switch (default 192.168.1.xxx).
Enter the switch's IP address (default is 192.168.1.251) in your browser and press ENTER.
10. Make sure the settings remain as above.
11. Navigate to Advanced -> Multicast -> IGMP Snooping. Under Settings select Enable for Status, V3 for
Version, and Enable for Report Suppression. Under VLAN Settings / VLAN ID 1 select Enable for IGMP
Back to top
10 |
P a g e
Advertisement
Table of Contents
