Table of Contents
Advertisement
6.
Click "OK" button so that the following screen appears and check sum is calculated.
7.
Click "Start" button so that the software programming will start.
Click "Start" button
8.
Confirm the bar in the Process window reach to 100% that means the software programming complete as
shown in figure 9-1D-4.
Confirm "100%"
9. Click "Exit" button to end the program.
* If the error occurs during above process, repeat the process from step 8 again.
10. Turn off and on the power of VTR in order to reboot the machine.
11. Confirm that the software version is updated.
12. Turn off the VTR power and remove the Flash memory version up tool and cables.
Figure 9-1D-3
Figure 9-1D-4
INF-26
Click "Exit" button
Advertisement
Chapters
Table of Contents
