Cue Rec/Pb Level Adj - Panasonic DVCPRO HD EX AJ-HD1200AP Service Manual

6-8. CUE REC/PB Level Adj.

RF/CUE
BOARD
TP LINE OUT
VR4002 [REC CURR]
ADJ.
LINE IN,
INPUT
AJ-HD1200AP/E : 1KHz, 0 dBu
AJ-HD1200AMC : 1KHz, +4 dBu
REC → PLAY
MODE
Blank Tape
TAPE
M. EQ Audio Analyzer
AJ-HD1200AP/E : 0 dBu ± 1 dB
SPEC.
AJ-HD1200AMC : +4 dBu ± 1 dB
1. Open the Set-up menu and select "(730) REC
CUE" and set "CH1+2".
2. Supply the following signal to both CH1 and CH2
LINE IN.
AJ-HD1200AP/E:
AJ-HD1200AMC:
3. Confirm that the playback level is in the
specification.
If not, adjust VR4002 and repeat the steps 1-3
until the playback level is in the specification.
1 kHz, 0dBu
± 1dB
1 KHz, +4dBu
± 1dB
ELE-19