Panasonic DVCPRO HD EX AJ-HD1200AP Service Manual page 236

8-2. Non Track Error Rate Display Procedure (Total Error Rate/All Format)
1. Perform the steps 1 to 6 of "8-1. On Track Error Rate Display Procedure".
2. Move the cursor (*) to the "ECC DISPLAY" by using the "UP" and "Down" Buttons, and then select
"NORMAL" and press the "MODE" button.
3. The Video and Audio can be selected by pressing the "COUNTER" switch.
4. Each time when the "COUNTER" button on the front panel is pressed, the display mode will be changed
from the mode 1 to 2 and 2 to 1.
5. The error rate value can be confirmed as shown figure 8-1-3.
6. The error rate display is cancelled when the" LOCAL/MENU/REMOTE" switch on the front panel is set to the
"LOCAL" or "REMOTE".
Display Mode
Mode 1 VIDEO
Mode 2 AUDIO
8-3. Error Rate Display on Audio Level Meter
Error Rate:
CH1
CH2
7 Segment Audio Indication
Indication CH1 CH2
Video
OFF OFF
Video r
LIT
HDSP, SDSP,
DV
HDLP
Mode
HDLP
HDSP
SDSP
DVSP
dB Indication Example
Indication
LIT
CH1
LIT LIT
CH2
Table 8-1-2
Segment of Audio Meter
LED LIT : 7 Segments or Less
LED LIT : 6 Segments or Less
LED LIT : 6 Segments or Less
LED LIT : 6 Segments or Less
Figure 8-1-3
INF-14
Indication Error Rate
VIDEO Lch Total
VIDEO Rch Total
AUDIO Lch Total
AUDIO Rch Total