Panasonic DVCPRO HD EX AJ-HD1200AP Service Manual page 287

1-28. LISTA Connection and Start Up
TAPE
VFM3781KML (LISTA), VFK3581KM/L (LISTA), VFM3000EDS (DV LISTA)
M. EQ
Personal Computer with A/D Board installed
(Requires Window 95® or 98® and computer must have LSA slot.)
TOOL
VFK1481N (LISTA Software), VFK1186 (LISTA Cable), VFK1300 (A/D Converter Board)
TP
TP405: ATF ERR RPL/TRL
TP5: R/P L HSW
TP2: PB R13 HSW (DV)
1. Create a directory and copy all files on the floppy disk (VFK1481N: LISTA Software) to the new directory. (i.e.:
C: LISTA)
2. Connect the LISTA cable to A/D Board in the PC.
3. Connect the clips of the LISTA cable to test points on the P.C.Board. (Refer to Items "Sensitivity Adjustment"
and "Linearity Adjustment".)
4. Execute the LISTA software on DOS mode by typing 'LISTA' and pressing ENTER key.
5. When the <<< FORMAT SELECT >>> display appears, select <4> DVCPRO HD.
6. When the <<< VTR SELECT >>> display appears, select the item "<3>AJ-HD1500" according to the
adjustment item as shown the table below.
Adjustment Item
HDLP Sensitivity Adjustment
HDLP Linearity Adjustment
HDSP Sensitivity Adjustment
SD Sensitivity Adjustment
DV Sensitivity Adjustment
Linearity monitor system of track
Using ATF error signal for DVCPRO
- - L I S T A P R O --
<<< FORMAT SELECT >>>
(1) DVCPRO
(2) DVCPRO X4
(3) DVCPRO 50
(4) DVCPRO HD
(5) DV
(6) Quit
Move: Cursor key
7. Select the Serial number of the Alignment tape on the screen. If the alignment tape to be used is not
registered, the compensation data needs to be entered. Press the ESC key, and select the item "<4>
Alignment Tape" in the main menu.
(RF/EQ Board: Slot 1)
(RF/EQ Board: Slot 1)
(RF/EQ Board: Slot 1)
VTR SELECT
AJ-HD1500
[Service Use]
Select: [ENTER] key
MECH-17
TP402: ATF ERR PBR13
TP7: TR L HSW (HDSP/50)
FORMAT
100M: 1800rpm
50M: 9000rpm
Linearity monitor system of track
Using ATF error signal for DVCPRO
- - L I S T A P R O --
(for DVCPRO HD VTR)
<<< VTR SELECT >>>
(1) AJ-HD150
(2) AJ-HDC20
(3) AJ-HD1500
AJ-HDX400
(4)
Move: Cursor key
(RF/EQ Board: Slot 1)
(RF/EQ Board: Slot 1)
Alignment Tape
VFM3781KML
VFM3581KM or KL
VFM3000EDS
[Service Use]
Select: [ENTER] key