Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. VCR
  5. AJ-HD3700H
  6. Supplemental operating instructions

Panasonic AJ-HD3700H Supplemental Operating Instructions

Hide thumbs Also See for AJ-HD3700H:

Advertisement

Quick Links

Download this manual
Digital Video Cassette Recorder
P
AJ-
E
Operating Instructions
(Supplement 1)

Advertisement

loading

Related Manuals for Panasonic AJ-HD3700H

Summary of Contents for Panasonic AJ-HD3700H

  • Page 1 Digital Video Cassette Recorder Operating Instructions (Supplement 1)
  • Page 2 Outline of changes and additions This supplement describes what changes and additions have been made to the operating instructions of the AJ-HD3700H digital video cassette recorder. New changes and additions Page in AJ-HD3700H’s Page in this Item concerned Change/addition operating instructions...
  • Page 3 Recording This flowchart shows the steps for recording the digital signals which are supplied to the unit from an external digital device. 11. Check the connections. 12. Turn on the power. 13. After making sure that no cassette tape is inserted in this unit, set the system frequency 59.94, 23.98, 24, 25 or 50 by F1 (FREQ) key of the SYSTEM SET UP menu.
  • Page 4 Recording ≥ The REF synchronization specifications applying when the 1080/23p, 24p or 25p True-P (Non-PsF) system format is selected are the same specifications as for the PsF system format. Use an interlace format signal for the HD tri-level SYNC signal. ≥...
  • Page 5 HOME menu displays ∑ Audio signal display area (Either 8 or 4 channels will be automatically displayed depending on the format used.) Use this to adjust the level of the input audio signals on the AUDIO IN menu. Alternatively, it is used to adjust the level of the audio playback output signals on the AUDIO OUT menu.

  • Page 6: Video In Menu

    VIDEO IN menu This menu is displayed by pressing the following key: VIDEO IN – 6 –...
  • Page 7 VIDEO IN menu Key designation Description INPUT DIGITAL: Selects the serial input signals. For selecting the HD video INT SG: Selects the internal signals. input signals. INT SG 75% CB: Selects the 75% color bar signal. For selecting the type of 100% CB: Selects the 100% color bar signal.
  • Page 8 TC/CHR menu This menu is displayed by pressing the following key: TC/CHR – 8 –...
  • Page 9 TC/CHR menu Key designation Description SOURCE INT: Built-in time code generator. For selecting EXT LTC: LTC time code from TIME CODE input connector. internal/external time code S LTC: LTC time code added to serial signals; not displayed signal. when the SD mode is selected. S VTC: VTC time code added to serial signals;...
  • Page 10 TC/CHR menu Key designation Description CF BIT° ON: CF BIT is recoorded. For selecting the color OFF: CF BIT is not recorded. frame bit ON/OFF during ≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key, recording.
  • Page 11 TC/CHR menu ∑ Changing the superimposing position (1) Move the position using the cursor keys. Center cursor key Cursor keys ≥When a cursor key is held down, the cursor will move more quickly. ≥When the center cursor key is pressed, the superimposing re- turns to its initial position.

  • Page 12: Tc/Chr Convert Menu

    TC/CHR CONVERT menu ∑ Concerning the TC SYNC value and sync phase settings Since the TC is similarly converted when the 1080/23psf (p) or 1080/24psf (p) format is converted into the 1080/59i (480/59i) or 1080/60i format, it is necessary to input the time information (TC SYNC value) that will serve as the reference for conversion and the 3:2 pull-down sequence (sync phase) of the post-conversion output images.
  • Page 13 TC/CHR CONVERT menu This menu is displayed by pressing the following keys: When the center cursor key is TC/CHR pressed, the 24TC display is highlighted. To enter the time code, use the number keys and cursor keys (2, 1) to set the time code, and then press the key.

  • Page 14: System Setup Menu

    SYSTEM SET UP menu This menu is displayed by pressing the following keys: SET UP The system format and video output format currently set in the menu are displayed. – 14 –...
  • Page 15 SYSTEM SET UP menu Refer to the setting flowchart and output status tables on pages 134 and 135.) Exactly Which operation is performed differs depending on whether the AJ-UDC3700P HD-SD format con- verter board, an optional accessory, has been installed. Key designation Description FREQ°...
  • Page 16 SYSTEM SET UP menu Key designation Description HD SDI For selecting the HD SDI MAIN output format. When the F5 key is pressed while holding down the F key, the HD SDI MAIN output format selection window is opened. The format can now be selected using the cursor keys (but only when “1080/23.98PsF”...
  • Page 17 SYSTEM SET UP menu System format and video output status table [When the AJ-UDC3700P HD-SD format converter board (optional accessory) has been installed] System format front setting HD SDI OUT HD MONI OUT SD SDI OUT SD SDI MONI CMPST F1: FREQ F3: VIDEO F4: AUDIO...

  • Page 18: Test Ic Card Menu

    TEST IC CARD menu Preparations When an error to be logged has occurred, this unit enables information on the date and time of the occurrence of the error to be recorded in addition to the TC information in the log. Initial registration of the date and time is required in order for this information to be recorded.
  • Page 19 TEST IC CARD menu Key designation Description USER_FIL User file management takes place using IC card. When the F key is pressed, transfer is made to TEST IC CARD USER FILE menu. ≥There is a load/save function for current (present deck status) and all registered files.
  • Page 20 TEST IC CARD ERROR LOG menu > > This menu is displayed by pressing the following keys: TEST Key designation Description DOWN_LD Loads current memory data from VTR to IC card. In addition, the serial No., software version and operation time are saved. If there is no error log data in any file other than one containing the machine current data (a file saved in the IC card or current data of the VTR), “ERROR”...
  • Page 21 – 21 –...
  • Page 22 DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region:...