Beckhoff ELX3312 Operating Manual page 69

A TwinSAFE SC connection is added by adding an alias devices in the safety project and selecting TSC
(TwinSAFE Single Channel)
Fig. 53: Adding a TwinSAFE SC connection
After opening the alias device by double-clicking, select the Link button
order to create the link to a TwinSAFE SC terminal. Only suitable TwinSAFE SC terminals are offered in the
selection dialog.
Fig. 54: Creating a link to TwinSAFE SC terminal
The CRC to be used can be selected or a free CRC can be entered under the Connection tab of the alias
device.
Entry Mode
TwinSAFE SC CRC 1 master
TwinSAFE SC CRC 2 master
TwinSAFE SC CRC 3 master
TwinSAFE SC CRC 4 master
TwinSAFE SC CRC 5 master
TwinSAFE SC CRC 6 master
TwinSAFE SC CRC 7 master
TwinSAFE SC CRC 8 master
ELX3312 and ELX3314
Used CRCs
0x17B0F
0x1571F
0x11F95
0x153F1
0x1F1D5
0x1663B
0x1B8CD
0x1E1BD
Version: 1.3.0
Parameterization and programming
next to Physical Device, in
69