Disposal - Beckhoff ELX3312 Operating Manual

LED displays
LED Color Meaning
Run green This LED indicates the terminal's operating state:
off
flashing State of the EtherCAT State Machine: PREOP = function for mailbox
single
flash
on
Error Ch 1 red The measurement value of channel 1 is in an invalid range of the characteristic curve.
Possible short circuit or wire breakage at channel 1.
Error Ch 2 red The measurement value of channel 2 is in an invalid range of the characteristic curve.
Possible short circuit or wire breakage at channel 2.
Error Ch 3 red The measurement value of channel 3 is in an invalid range of the characteristic curve.
Possible short circuit or wire breakage at channel 3.
Error Ch 4 red The measurement value of channel 4 is in an invalid range of the characteristic curve.
Possible short circuit or wire breakage at channel 4.
3.7

Disposal

Products marked with a crossed-out wheeled bin shall not be discarded
with the normal waste stream. The device is considered as waste
electrical and electronic equipment. The national regulations for the
disposal of waste electrical and electronic equipment must be observed.
ELX3312 and ELX3314
State of the EtherCAT State Machine: INIT = initialization of the terminal or
BOOTSTRAP = function for firmware updates of the terminal
communication and different standard-settings set
State of the EtherCAT State Machine: SAFEOP = verification of the Sync
Manager channels and the distributed clocks.
Outputs remain in safe state
State of the EtherCAT State Machine: OP = normal operating state; mailbox
and process data communication is possible
Version: 1.3.0
Mounting and wiring
31