GEN
INFO
How to use this manual
Manual format
The format of this manual has been designed to make service procedures clear and easy to under-
stand. Use the information below as a guide for effective and quality service.
• Parts are shown and detailed in an exploded diagram and are listed in the component list (refer to
1 in the figure below for an example page).
• The component list consists of part names and quantities (refer to 2 in the figure below). To
assemble or install the components, reverse the steps indicated in the component list.
• Symbols are used to indicate important aspects of a procedure, such as the grade of lubricant and
lubrication point (refer to 3 in the figure below).
• Tightening torque specifications are provided in the exploded diagrams (refer to 4 in the figure
below for an example), and in the related detailed instructions. Some torque specifications are
listed in stages as torque figures or angles in degrees.
• Separate procedures and illustrations are used to explain the details of removal, checking, and
installation where necessary (refer to 5 in the figure below for an example page).
TIP
For troubleshooting procedures, refer to "Troubleshooting" in Chapter 9.
How to use this manual
1-1
E
2
3
4
5
6
7
8
9