Indication System; Dual Analog Meter Unit - Yamaha WaveRunner FZR-GX1800 Service Manual

– +
ELEC

Indication system

1 2
4
a
R/Y
B
1
Indication system
3

Dual analog meter unit

4
TIP
• Push the unlock button, and then check that
1 Speedometer
2 Information display
3 Tachometer
4 Indicator lights
• When pushing the unlock button, the speed-
Measurement steps:
7-60
1. Check:
• Dual analog meter unit external appear-
ance
Cracked meter housing/meter is fogged/
shows signs of water intrusion →
Replace the dual analog meter unit.
2. Check:
• Information display
Intermittent or missing segment a →
Replace the dual analog meter unit.
No display → Measure the dual analog
meter unit input voltage.
all indicator lights and display elements on
the dual analog meter unit light up.
ometer and tachometer make 1 sweep, all
displays light up for 2 seconds, and then it
starts to operate normally.
3. Measure:
• Dual analog meter unit input voltage
Within specification → Replace the dual
analog meter unit.
Out of specification → Check the wiring
harness.
1. Disconnect the dual analog meter unit
coupler 1.
2. Push the unlock button, and then measure
the input voltage at the dual analog meter
unit coupler terminals (wiring harness
end).
Dual analog meter unit input voltage:
Red/yellow (R/Y) – Black (B)
12 V (battery voltage)
E
1
2
3
4
5
6
7
8
9