POWR
Engine unit
J
K
M
P
Q
R
S
T
U
N
L
O
R
5-12
13. Disconnect the breather hose J from the
intake pipe K, and then remove the intake
pipe K from the supercharger.
14. Unhook the fasteners L, and then remove
the air filter case cover M. Remove the air
filter case bolts N, and then remove the
air filter case O.
15. Remove the plastic tie P from the cooling
water hose Q.
16. Disconnect the cooling water hoses R
from the oil cooler assembly.
17. Disconnect the cooling water hose S from
the air cooler and cooling water hose T
from the thermostat housing.
18. Place a cloth under the oil filter U, and
then remove it with the special service
tool.
TIP
Make sure to clean up any oil spills.
Oil filter wrench:
90890-06830
E
1
2
3
4
5
6
7
8
9