Remote Control Receiver - Yamaha WaveRunner FZR-GX1800 Service Manual

– +
ELEC
1
1
Remote control system
B
R
L/Y

Remote control receiver

1. Measure:
• Remote control receiver input voltage
Out of specification → Check the wiring
harness.
Measurement steps:
1. Disconnect the remote control receiver
coupler 1.
2. Measure the input voltage at the remote
control receiver coupler terminals (wiring
harness end).
Remote control receiver input voltage:
Red (R) – Black (B)
12 V (battery voltage)
2. Measure:
• Remote control receiver output voltage
Out of specification → Replace the
remote control receiver.
Measurement steps:
1. Disconnect the dual analog meter unit
coupler 1 from the remote control
receiver.
2. Push the unlock button, and then measure
the remote control receiver output voltage
at the dual analog meter unit coupler ter-
minal (wiring harness end) and ground.
Remote control receiver output
voltage (reference data):
Blue/yellow (L/Y) – Ground
11.0–12.0 V
7-59
E
1
2
3
4
5
6
8
9