Yamaha WaveRunner FZR-GX1800 Service Manual page 90

CHK
ADJ
General
2. Lubricate:
• Throttle cable (handlebar end)
TIP
• Before lubricating the throttle cable, discon-
nect it from the throttle lever assembly.
• After lubricating the throttle cable, make sure
to adjust the throttle lever free play. Refer to
"Throttle lever free play check and adjust-
ment."
Recommended lubricant:
Rust inhibitor
3. Lubricate:
• Throttle cable (APS end)
• Return spring
Recommended lubricant:
Yamaha grease A
4. Lubricate:
• QSTS cables (handlebar end)
TIP
• Before lubricating the QSTS cables, remove
the QSTS grip assembly from the handlebar.
Refer to "Handlebar assembly removal" in
Chapter 8.
• Spray the rust inhibitor into the outer cables,
and apply grease to the inner cables.
Recommended lubricant:
Yamaha grease A
Rust inhibitor
3-25
E
1
2
4
5
6
7
8
9