Engine Oil Change - Yamaha WaveRunner FZR-GX1800 Service Manual

CHK
ADJ
Power unit
1
b
a
3-15
2. Remove the oil level gauge 1, wipe the
gauge clean, and then install the gauge
into the oil level pipe completely.
3. Remove the oil level gauge 1 again to
check that the oil level is between the min-
imum level mark a and maximum level
mark b on the gauge.
4. Install the oil level gauge.

Engine oil change

WARNING
Be careful when handling the engine oil to
avoid burns. The engine oil is hot immedi-
ately after the engine is turned off.
NOTICE
• When starting the engine to check the oil
level on land, make sure to connect a gar-
den hose to the watercraft for proper wa-
ter supply.
• Make sure that debris or water does not
enter the oil filler hole.
1. Change:
• Engine oil
Changing steps:
1. Place the watercraft in a precisely level
position on land.
2. Start the engine, allow it to warm up for 5
minutes, and then stop the engine.
E
1
2
4
5
6
7
8
9