EBU00771
Cooling system
1. Check the coolant level in the coolant
reservoir when the engine is cold as
the coolant level will vary with engine
temperature. The coolant level should
be between the maximum and mini-
mum marks.
1. Coolant reservoir cap
2. Maximum level mark
2. If the level is low, remove panel D.
(See pages 8-6 ~ 8-7 for panel removal
and installation procedures.)
3. Minimum level mark
3. Remove the coolant reservoir cap, and
then add coolant or distilled water to
raise it to the specified level.
4. Install the panel.
Coolant reservoir capacity:
0.25 L (0.22 Imp qt, 0.26 US qt)
1. Coolant reservoir drain hose
8-20