Menu Item Setting; Changing The Language Setting - GRASS VALLEY Ignite SDC Series Instruction Manual

Appendix A — SD (NTSC) Camera Block

Menu Item Setting

Changing the Language Setting

44
Each of the four use modes of the camera has a main menu (example shown
in Figure 18).
Figure 18. Main Menu - Halogen, Fluorescent, Outdoor Mode
• Each item of the main menu has a submenu, which consists of several
settings.
• These settings have been preset to the optimum values to suit each use
mode, and can be changed to suit actual shooting conditions.
1. Keep the MENU switch depressed for 5 seconds or more. The main
menu appears on the monitor screen.
2. Each time the MENU switch, ITEM/AWC switch, or NO/BAR switch
is pressed, the blinking item moves up or down.
3. When the YES/ABC switch is pressed after selecting the desired item
to blink, the submenu for the selected item appears on the screen.
4. Select the desired item to be changed in its settings using the MENU
switch and ITEM/AWC switch.
5. Press the YES/ABC switch or NO/BAR switch to change the settings.
6. Select [Return] using the MENU switch and ITEM/AWC, then press
the YES/ABC switch to return to the main menu.
7. After changing the settings, take the following steps. Select [End] using
the MENU switch and ITEM/AWC switch and press the YES/ABC
switch.
The language on the menu screen can be changed from English to Japanese.
(Factory setting: English)
• Halogen, Fluorescent, Outdoor Mode – Select Japanese in the Language
setting in Other Set submenu.
• Use Mode – Select Japanese in the Language setting in Other Set2 sub-
menu.
Use mode
Blinking
Ignite SDC/HDC Robotic Camera Instruction Manual