GRASS VALLEY Ignite SDC Series Instruction Manual page 14

Safety Summary
14
Cap the lens when camera is not in use
placing the lens cap over the lens when the camera is not in use. If the lens
is not installed, protect the surface of the prism by placing the body cap into
the lens mount hole. Use a mild blower or lens cleaning tissue designed for
coated lenses, to clean the surface of the lens or prism in the event that it
should become dirty. Do not touch the surface of the lens or prism.
Do not aim the camera toward the sun
could be damaged. Use caution when operating the camera in the vicinity
of spot lights or bright lights, as well as light reflecting objects and surfaces.
Do not use the camera in high temperatures or high humidity environments
camera in an environment where the temperature is within 32 °F (0 °C) to
+104 °F (+40 °C), and the relative humidity is within 30% to 90% (no con-
densation).
Do not leave the camera turned on when not in use.
Do not turn camera power on and off repeatedly.
Do not block the ventilation slots
— Protect the precision made lens by
— Even with power off, the camera optics
— Internal heat buildup can cause a fire.
Ignite SDC/HDC Robotic Camera Instruction Manual
— Use the