Using The Ocp 400; Using The Camera Menu; Entering The Camera Menu - GRASS VALLEY LDX FLEX User Manual

Chapter 4 - Operating instructions

4.3 Using the OCP 400

Refer to the OCP 400 User's Guide for detailed operating instructions for the OCP 400.

4.4 Using the camera menu

The camera menu can be viewed in the viewfinder (or connected monitors) and navigated by
means of the rotary control and the select and back buttons which are located at the front and
left of the camera:
Menu select
Menu rotary
The functions of the camera are grouped into a structure of menus and sub-menus. Each of the
menus gives you access to a particular group of functions. Spend some time using the controls
and menus to discover the various functions. You will quickly learn to operate the camera
intuitively.
☞ ☞
Note Note
Some of the menu items may not appear if the user level is not set to 3.

4.4.1 Entering the camera menu

Press the select button after the camera is switched on, the message MENU OFF appears in the
viewfinder. Press the select button again while this text is showing, the MAIN menu appears in
the viewfinder.
36
button
control
Menu Off
Operator Toolbox
Production Setup
Creative Control
Configuration
Main
Diagnostics
Exec
>>
>>
>>
>>
>>
LDX Series Software Upgradable Camera Platform User's Guide (v3.1)
Menu back
button