Controlling The Camera; Navigating The Camera Menu - GRASS VALLEY LDX 86 HS User Manual

Chapter 4 - Operating instructions

4.4 Controlling the camera

There are several ways to control the camera:
• Using the operational switches on the camera;
• Using the camera menu to select functions;
• Using an Operational Control Panel (OCP 400) connected to the C2IP network or XCU;
– Refer to the OCP 400 User's Guide for detailed operating instructions for the OCP 400.
• Using a Master Control Panel (MCP 400) connected to the C2IP network or XCU;
☞ ☞
Note Note
If you cannot access some camera functions or you wish to restrict access, refer to
and security" on page

4.4.1 Navigating the camera menu

The camera menu can be viewed in the viewfinder (or connected monitors) and navigated by
means of the rotary control and the select and back buttons which are located at the front and
left of the camera:
Menu select
Menu rotary
The functions of the camera are grouped into a structure of menus and sub-menus. Each of the
menus gives you access to a particular group of functions. Spend some time using the controls
and menus to discover the various functions. You will quickly learn to operate the camera
intuitively.
☞ ☞
Note Note
Some of the menu items may not appear if the user level is not set to 3.
36
58.
button
control
LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User's Guide (v1.0)
"Access
Menu back
button